Видео

mate plexiglass is expensive. wy dontyou jsut do this on an empty room or behind a wall and protect the camera instead? like its cheaper to just sweep the pieces. otherwise you could use something lees fregile like plastic films (bags etc) to cover the bottle

I noticed that a lot of MOTs are being scavenged to rewire the secondary as DIY spot welder for Lithium battery tabs where the primary still runs at 120 and the secondary only has up to 3 turns of hefty gauge cable to draw the large current needed. Reversing the connection as you did, equates to the same thing except that the output voltage is about twice while the current is halved. You need about 200A for a 15 mil thick tab. People are using 12VDC, 7Ah LIPO batteries rated at 50C and a control PCB that parallels MOSFETs to drive the timing within milliseconds. You got 6VAC and the microwave is rated at 1200W, so the current should be 200A max.. N Channel MOSFET works on DC, but can drive the 6VAC if one end of the coil is used as COMMON source. It will then see it as a 12V DC wave that is smoothed out using a 220uF 25VDC electrolytic capacitor. The Gate can be driven from a 9V DC battery with its negative connected to the COMMON source. Theoretically, this should works and save us the rewiring time and energy to achieve the same goal. By the way, those PCB spot welder controller only cost lees than $20.

Great!

Didn't even make it a minute because of that voice and way of droning on.

I'd lie to see if you can put dry ice in a glass bottle, & keep pressure. I'm trying to find another container other than a CO2 bottle that can hold a small amount of CO2.

Thx i only wanted the magnet tho but real thx 💯

1:07 *SNAP!!*

1:16 POP!

Wow after 14 years ❤

Also don't kill yourself

Based

3:21 -Plasmoid event Very cool to see, Thanks for sharing.

Gotta love resonant capacitors

No surprise it can harden. All you need is an excess of carbon to compensate for the loss of it stripping the oxygen of the oxide away and binding with it preferentially to form CO² and CO (monoxide). You're like double the temperature that carbon starts stealing oxygen in that reaction. I know it was 6 years ago, but if in doubt, add lamp or bone black.

hello i am 15 and i am gonna try to extract this magnet wish me luck hah hope I don't get pneumonia

lovely 😂

A time back, I had thought about using such an AC compressor on a racecar (long-distance road track), but there are a number of hold-backs. First off, it would take a HVAC guy to run new seamless tubing runs for you, secondly, not sure there's enough refrigerant oil in the system to support that much larger of a cooling circuit, next is the coolant used in the A/C versus what would work in an automotive system, and last but not least, a thermostat-controlled kick-out (like an automotive centrifugal clutch) that would kick out compression when it became too high...all in all, I gave up the idea. Nowadays, they have DC A/C compressors to do this very same thing with. The idea was to not leach horsepower from the car to have A/C, to stay cool on 95-degree days while in a fire suit and helmet.

Very interesting. Thanks 👍

Bro you sound like Terrence McKenna 👌

If magnet is broken in magnetron how to repair it

I can't hold back my laughter

1:14 I love how the glass still glows after the explosion!

candle is the best

You can also do it by connecting a multimeter in uA-Range through a large resistor (at least 10 Megaohms) to the secondary and power the transformer like you would do normally. Then calculate the output voltage.

HELLO I cant get the top of my window ac unit compressor top off ,,there is some kind of clay like glue globbed on top of the compressor..what is this stuff and how do i get the top of compressor off to test? thank u

Great video, you need to speak faster, I had to listen at ×2 speed.

Can one actually use a MOT in reverse as a high current low voltage supply?

What kind of a workplace is this? With extremely gassy employees and drunks wandering to the building, breaking glass and shooting at prospective clients.

Fart count: 35

I did this. Pulsed the secondary with a tiny 18650. The primary read like -140v AC! Impossible! Discovered it fried my cheap ACE meter(I miss Radio Shack). So it probably wasnt accurate.

300psi is awfully low for a high pressure system. Did you mean 300 bar or 3000psi?

I wonder what a 60kw version of this would dew if mounted on 2 Chinese satellites that happened to float over Maui

Aí mano me

0:21 0:21 0:22 0:23 Acho mxn ou mais f 😮😢 Vou te mandar o vc tá yvzn o que msm não sei vlw mxn 😨😰😱 Ah não ks 1:16 1:16 1:17 a

Im a bit late but could you make a fin stabilized discarding sabo?

0:06 0:06 0:07 Akx y msm assim já estou vsn com o meu lá no na rua y msm assim 0:27 0:27 0:28 0:29 0:29 0:30 a Han e a João e vc ga

Nobody saw the ghost face 😳

Thanks for sharing

I’ve wondered if the steel made from a thermitic reaction would be workable in a furnace.

Hello! What is the ratio of vinegar to salt?

12 volts.... But how many watts are you using?

can someone show how to bulid this cuicut

Do you need methanol too? I have boric acid and i was just going to put some on a bonfire and watch it turn green

His voice is quite robotic. Goes perfectly with the subject.

Tell me why I added one capacitor and I got a full arc🤷🏾‍♂️

i only put 2 capictors on my ting like that and i got anr ark that was omost a foot

i have the exact same sylvania metal arc 1000w bulb

very helpful

Nice !! Would be cool to see if it does the same with a plastic bootle